欢迎光临
手机网站 | 联系我们:0577-85822921 | 加入收藏
  • 当前位置:浙江米勒洁净设备科技有限公司 > 产品中心 > 不锈钢卡箍 管夹系列 > 加长接头,不锈钢加长接头,不锈钢加长卡箍接头厂家

    加长接头,不锈钢加长接头,不锈钢加长卡箍接头厂家

    产品型号: 齐全-加长快装接头
    品  牌: 伊米勒卡箍加长接头
    • ≧1 只
      ¥4.50
    所 在 地: 浙江温州
    更新日期: 2020-07-13
    详细信息
    加长接头,不锈钢加长接头,快装加长接头,翻边加长接头,不锈钢加长卡箍接头厂家加长接头,不锈钢加长接头,不锈钢加长卡箍接头厂家



          加长接头,不锈钢加长接头,不锈钢加长卡箍接头厂家加长接头,不锈钢加长接头,不锈钢加长卡箍接头厂家



          加长接头,不锈钢加长接头,不锈钢加长卡箍接头厂家



    产品名称:加长接头,不锈钢加长接头,快装加长接头,翻边加长接头

    产品材质:不锈钢SUS304加长接头,不锈钢SUS316加长接头;


    规         格:ф19*1.5;ф25*1.5;ф32*1.5;ф45*1.5;ф51*1.5;ф57*2;ф63*2;ф76*2;ф89*2;ф102*2;ф108*2;

    所属系列:快装接头系列

    公称通径:DN15-DN150mm

    公称压力:16-64KG

    适用温度:-20~150℃

    连接方式:快装螺纹,焊接,法兰,快接,扳把式等。

    适用范围:石油天然气、车船机械制造、航空航天、冶金化工、交通、电力、集中供热、真空、制冷工业,化工,液化石油气,车船制造设备等。

    构造:一个硅晴垫圈,两个接头,一个管卡
    加长接头,不锈钢加长接头,不锈钢加长卡箍接头厂家卡箍接头的优点:
     1.快速,不需焊接和再镀锌,安装速度比法兰连接的管件快3倍以上。
    2.简易 它比法兰轻、锁紧机械设计巧妙,螺栓数量少,无需对孔对锁。
    3.可靠  ①该卡箍、垫圈与管端沟槽系全圆周压紧,其管端拉力强度大,试验压力达4.2MPa,温度-30℃~100℃,真空度可达0.08MPa;
    ②垫圈设计为C型,能形成三重防漏,管内压力越大,密封越好;
    ③垫圈可因流体介质、管材、温度来进行合适的选择密封圈材质。
    4.隔振吸震 ①因管末端有间隙可有效地隔断噪音及振动的传播,热胀冷缩时管路 亦不受影响;加长接头,不锈钢加长接头,快装加长接头,翻边加长接头,不锈钢加长卡箍接头厂家

    ②密封垫圈也可吸收噪音及振动。
    5.经济安全便于工程预算,较法兰式连接节约总工程费用的20%,施工无需电源、氧气、明火。加长接头,不锈钢加长接头,不锈钢加长卡箍接头厂家
    6.零污染 因原件安装不存在焊渣和破坏镀锌层与涂塑层的问题,故可确保管道畅通。连接后的管路尤其消防喷淋系德康统不会因其他方式的连接而产生锈蚀堵塞管路中的设备、喷淋头等。加长接头,不锈钢加长接头,快装加长接头,翻边加长接头,不锈钢加长卡箍接头厂家

     7.占据空间少 ①法兰安装空间较卡箍接头为3:2。
    ②卡箍接头及配件可先进行安装,并可调整任意方向、角度,配管随意。
     8.维护方便 拆洗与更换只需拆下两个卡箍,4个螺栓即可,便于管路延伸、更换、转动方向。均匀磨损。加长接头,不锈钢加长接头,快装加长接头,翻边加长接头,不锈钢加长卡箍接头厂家
    .
    9.配管齐全我厂卡箍配件规格DN25~600,特殊规格可定制
    卡箍结构:两个接头把垫圈夹在中间,然后用管卡把两个接头连接起来.这样即密封性好,组装 拆卸也方便加长接头,不锈钢加长接头,不锈钢加长卡箍接头厂家
    具体的一些尺寸请与我们电话联系
    温州德康*加工非标管件、加长接头、阀门。承接各种图纸加工非标机械零件加工,非标机械设备加工,产品包括:非标管支架,非标三通,非标弯头,非标大小头,非标翻边,非标接头,非标卡套接头,非标管接头,非标球阀,非标三通球阀,非标卡压接头,非标内外丝弯头,非标直角弯头等各种非标接头和非标阀门,*加工非标的产品其质量有保障,加长接头,不锈钢加长接头,不锈钢加长卡箍接头厂家,看起来精美细致加长接头,不锈钢加长接头,快装加长接头,翻边加长接头,不锈钢加长卡箍接头厂家,*生产加长接头,不锈钢加长接头,快装加长接头,翻边加长接头,不锈钢加长卡箍接头厂家
    加长接头,不锈钢加长接头,快装加长接头,翻边加长接头,不锈钢加长卡箍接头厂家





    - - - - - --  - - - - - - --  -- - - --- ----    - - -- - -  - - - - - - - - - - - - -- - - - - - - - -  - - - - - -  - - - -- -


    加长接头,不锈钢加长接头,不锈钢加长卡箍接头厂家
    Product Name: Extension connector, stainless steel extension connector, quick extended joints, flange extended joint


    Material: stainless steel SUS 304, SUS 316 stainless steel;

    Specification: ф19 * 1.5; ф25 * 1.5; ф32 * 1.5; ф45 * 1.5; ф51 * 1.5; ф57 * 2; ф63 * 2; ф76 * 2; ф89 * 2; ф102 * 2; ф108 * 2;

    Belongs to the series: quick connector series

    Nominal diameter: DN15-DN150mm

    Nominal pressure :16-64KG

    Suitable temperature: -20 ~ 150 ° C

    Connection: threaded quick, welding, flange, quick connect, pull handle and a spout.

    Scope of application: oil and gas, travel, machinery manufacturing, aerospace, metallurgy, transportation, electricity, centralized heating, vacuum, refrigeration industry, chemicals, liquefied petroleum gas, travel manufacturing equipment and so on.

    Construction: a clear silicon washer, two connectors, a tube card
    The advantages of the clamp connector:
    Fast, without welding and re-galvanized, install faster than the flange connection pipe more than three times faster.
    Easy it is lighter than the flange, locking the ingenious mechanical design, a small number of bolts, no holes on the lock.
    3 reliable ① The clamp, washer and the end of a pipe trench the whole circumference of the Department of compression, tension strength of the pipe end, the test pressure of 4.2MPa, temperature -30 ℃ ~ 100 ℃, vacuum up to 0.08MPa;
    The ② washer designed for the type C, can form a triple leak-proof, the greater the pressure tube, sealed the better;
    The ③ washer fluid medium, pipe, temperature suitable choice of seal materials.
    Isolation shock-absorbing 1 for possession of the end of the gap can be effectively cut off the spread of noise and vibration, thermal expansion and contraction when the pipeline is not affected;
    ② gasket can also absorb noise and vibration.
    Economic security to facilitate the project budget, a savings of 20% of the total project cost over the flange connection, construction without power, oxygen, and open flame.
    Welding slag and destruction of the zinc coating and the coated layer. Zero pollution due to the original installation does not exist, it can ensure pipeline flow. Connected after the pipeline, in particular the fire sprinkler systems and Dekang system not the other way to connect and produce rust clogging the pipeline equipment, spray first class.
    Occupy space less ① flange mounting space than the clamp connector is 3:2.
    The ② clamp connectors and accessories can be installed and can be adjusted in any direction, angle, piping casual.

    Wenzhou Dekang specializes in processing non-standard fittings, extended fittings, valves. Undertake a variety of drawing and processing of non-standard mechanical parts processing, processing of non-standard equipment, products include: non-standard pipe brackets, non-standard three links, non-standard elbow, non-standard size of the first flange of the non-standard, non-standard connector, non- standard card connectors, non-standard fittings, non-standard ball valves, non-standard ball valve, non-standard compression joints, elbows of non-standard, non-standard right angle bend, and other kinds of non-standard connector, and non-standard valves , specializes in processing non-standard products quality is guaranteed, it looks fine and detailed.



    欢迎来电咨询加长接头,不锈钢加长接头,不锈钢加长卡箍接头厂家;加长接头,不锈钢加长接头,不锈钢加长卡箍接头厂家; 
     
  • 留言
    标  题: *(必填)
    内  容: *(必填)
    联系人:
    邮  箱:
    手  机:
    固  话:
    *(必填)
    公  司: *(必填)
    地  址: *(必填)